Arduino distance meter with OLED display

 Arduino distance meter with OLED display circuit:

 Arduino distance meter with OLED display code:

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define CommonSenseMetricSystem
//#define ImperialNonsenseSystem
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define trigPin 13
#define echoPin 12

#define OLED_RESET 4
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  Serial.begin (9600);
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C); //initialize with the I2C addr 0x3C (128x64)
  display.clearDisplay();

}

void loop() {
  long duration, distance;
  
  digitalWrite(trigPin, LOW);  //PULSE ___|---|___
  delayMicroseconds(2); 
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10); 
  digitalWrite(trigPin, LOW);
  
  duration = pulseIn(echoPin, HIGH);
  
  #ifdef CommonSenseMetricSystem
  distance = (duration/2) / 29.1;
  #endif
  #ifdef ImperialNonsenseSystem
  distance = (duration/2) / 73.914;
  #endif

  display.setCursor(22,20);  //oled display
  display.setTextSize(3);
  display.setTextColor(WHITE);
  display.println(distance);
  display.setCursor(85,20);
  display.setTextSize(3);
  
  #ifdef CommonSenseMetricSystem
  display.println("cm");
  #endif
  #ifdef ImperialNonsenseSystem
  display.println("in");
  #endif
  
  display.display();

  delay(500);
  display.clearDisplay();
 
  Serial.println(distance);//debug

}